T7316E

This type of phone can be used for system, centralized and personal administration functions covered by this document. For system and centralized administration, the phone must be connected to one of the first two extension ports on the system.

•Note that while physically very similar, the programmable button numbering order for the T7316 and T7316E phones differ. The T7316 is more similar to the M7310 in the order of button numbering.

•Additional buttons can be supported on a T7316E phone through the addition of T7316E KEM button modules.

Button Numbering

The diagram below indicates the button functions during normal phone operation. The double digit numbers are the button numbering for programmable buttons.

•For systems running in key system mode, the first two programmable buttons, 01 and 02, are fixed as Intercom 1 and Intercom 2 buttons. Buttons 16 downward are assigned as line buttons, starting from the first line, based on the Number of Lines setting or the number of analog trunks installed in the system.

•For systems running in PBX system mode, the first three buttons, 01 to 03, are fixed as call appearance buttons.

Administration Mode Buttons

The diagram below indicates the button functions during phone based administration processes.