The term BST is used in this document to cover M-Series and T-Series phones supported the IP Office Basic Edition system.

M-Series Phones

T-Series Phones

Other Phones

M7100

M7100N

M7208

M7208N

M7310

M7310N

M7324

M7324N

T7000

T7100

T7208

T7316

T7316E

T7406

T7406E

4100 Series

7400 Series

Audio Conferencing Unit (ACU)

 

The M7324, M7324N, M7310, M7310N, T7316 and T7316E phones can be used for system and extension programming as detailed below. You can access administration during a call if using the phone's handset for the call rather than the speaker or headset. Once in administration, all buttons presses are used for administration only and do not affect the call.

 

System Administration

The following method is used to enter system administration mode. It is only supported on the first two extensions in the system.

1.At either of the first two extensions on the system, press feature small Feature **config (ie. Feature **266344).

If the system has a system password set, it is requested. Enter the password.

2.The phone displays System Admin.

 

Centralized Administration

The following method is used to enter centralized administration mode. It is only supported on the first two extensions in the system.

a.At either of the first two extensions on the system, press feature small Feature **user (ie. Feature **8737).

If the system has a system password set, it is requested. Enter the password.

b.At the Extension: prompt enter the extension number of the extension you want to program.

 

Telephone Programming

The following method is used to enter telephone programming mode. This mode can be used on any extension.

a.Press feature small Feature and dial *1 or *2 or *3.

If the system has a system password set, it is requested. Enter the password.