This menu is accessed from the System page by selecting Setup Auxiliary Equipments.

This menu is accessed from the Admin Tasks list by selecting Auxiliary Equipment.

If a handset has been configured as being a door phone, you can specify which extension is alerted when that door phone is used. Two door phones can be configured into the system.

There are two separate menus, one for Door Phone 1 and one for Door Phone 2. Each has the same range of settings.

Assign Extension: Default = None.
Use the drop down list to select the extension to which the door phone is connected. The extension Equipment Type (User Setup | Advanced Settings) is set to Door Phone 1 or Door Phone 2 as appropriate.

Extensions to be alerted: Default = None.
This table is used to select which extensions are alerted and can answer when the door phone is used.