File | Preferences | Preferences

This tab is accessed through File | Preferences and then selecting the Preferences sub-tab.

•Edit Services Base TCP Port: Default = On.
This field shows or hides the Service Base TCP Port setting.

•Service Base TCP Port: Default = 50804
TCP access to the configuration and security settings on a system requires IP Office Manager to send its requests to a specific port. This setting allows the TCP Base Port used to be set to match the TCP Base Port setting of the system.

•Service Base HTTP Port: Default = 80
HTTP access to the configuration and security settings on a system requires IP Office Manager to send its requests to a specific port. This setting allows the HTTP Base Port used to be set to match the HTTP Base Port setting of the system.

•Enable Time Server: Default = On.
This setting allows Manager to respond to time requests from IP Office systems.

•Enable BootP and TFTP Servers: Default = On.
This setting allows Manager to respond to BOOTP request from IP Office systems for which it also has a matching BOOTP entry. It also allows the IP Office to respond to TFTP requests for files.

•Auto Connect on start up: Default = On
If on, when Manager is started it will automatically launch the Select IP Office menu and display any discover IP Offices. If only one IP Office is discover, Manager will automatically attempt to login using the default name and password and if this fails display the login request for that IP Office instead.

•Set Simplified View as Default: Default = On
If on, the Manager will start in simplified view if no configuration is loaded.

•Default to Standard mode: Default = Off
If on, when a configuration for a new or defaulted system running in IP Office Basic Edition mode is loaded, Manager will automatically convert the configuration to IP Office Essential Edition. Sending the configuration back to the system will restart it in IP Office Essential Edition. Only select this option if the only systems you expect to install are IP Office Essential Edition systems.

•This setting does not affect existing systems with non-default configurations.

•Use Remote Access
This setting is not used with IP Office Basic Edition systems.

•SE Central Access
This setting is not used with IP Office Basic Edition systems.

•SE Central Access port
This setting is not used with IP Office Basic Edition systems.