The current configuration settings open within Manager can be sent to the IP Office system.
1.The first steps of this process depend on whether you are sending a configuration received from the IP Office system or sending one opened offline/created new.
•A Configuration Opened from an IP Office
Click in the main toolbar or select File | Save Configuration from the menu bar.
•A Configuration Created Offline or Opened from a PC File
Select File | Offline | Send Config from the menu bar.
2.The Send Configuration window is displayed.
•Configuration Reboot Mode
If Manager thinks the changes made to the configuration settings are mergeable, it will select Merge by default, otherwise it will select Immediate.
Send the configuration settings without rebooting the IP Office. This option is selected by default if the changes made since the configuration was loaded into Manager as mergeable, do not select this option otherwise.
Send the configuration and then reboot the IP Office.
Send the configuration and reboot the IP Office when there are no calls in progress. This mode can be combined with the Call Barring options.
The same as When Free but waits for a specific time after which it then wait for there to be no calls in progress. The time is specified by the Reboot Time. This mode can be combined with the Call Barring options.
This setting is used when the reboot mode Timed is selected. It sets the time for the IP Office reboot. If the time is after midnight, the IP Office's normal daily backup is canceled.
These settings can be used when the reboot mode When Free is selected. They bar the sending or receiving of any new calls.
3.Click OK. A Service User name and password may be requested.
•If the service user name or password used do not have a match on the IP Office, "Access Denied" is displayed.
•The message Failed to save the configuration data. (Internal error) may indicate that the system has booted using software other than that in its System SD card's primary folder.