PRI Trunk (ESTI)

The settings for an ESTI PRI trunk can be changed by double clicking on the trunk entry in the Installed Trunks table. Adjust the values are required and then click on Save.

•! WARNING - Reboot Required
Changing any of these settings requires the system to be rebooted for the changes to take effect. Rebooting the system will end all calls currently in progress.

web pri etsi change

Channel Setup

This menu is accessed by selecting the trunk in the Installed Trunks table and then clicking on the edit icon in the Channel Setup panel on the right.

web pri etsi channel setup

•! WARNING - Reboot Required
Changing any of these settings requires the system to be rebooted for the changes to take effect. Rebooting the system will end all calls currently in progress.

•No: For information only, not editable.

•ID/Line Appearance ID: Default = Auto-assigned
This number is used to uniquely identify the telephone line or channel. The number can be assigned to programmable buttons on extensions to allow the users to make and answer calls on that line or channel.

•Local Number
Information only. Use to store an associated number for test calls to the line.

•Anonymous: Default = No
If selected, withhold sending caller ID information on outgoing calls. For system's with their Mode set to PBX, this setting can be overridden by the ARS selector used to route the outgoing call.

•Coverage Destination: Default = None.
This option sets where incoming calls should alert in addition to alerting on those extension that have a line appearance button programmed for the line. When the phone system is in night service mode, calls alert at the members of the Night Service group.

	•None If set to None, incoming calls will only alert on user extensions with line appearance buttons that match the line's Appearance ID.
	•Extension Route incoming calls to a particular extension.
	•Phantom Extension A phantom extension can be selected as the destination for calls.
	•Hunt Group Incoming calls can be routed to one of the 6 rotary hunt groups.
	•Calling Group For systems with their Mode set to PBX, incoming calls can be routed to one of these 4 ring all groups.
	•Operator Group For systems with their Mode set to PBX, incoming calls are routed to the Operator Group.
	•Voicemail Route incoming calls to the systems voicemail to collect messages. This requires the caller to know the mailbox number and passcode.

•Ring Pattern: Default = 1.
Selects the ring pattern that should be used for calls when alerting on an extension. Calls forwarded, sent to call coverage or to a hunt group will always use the line ring pattern. Calls direct to an extension will use the line ringing pattern unless the user has Override Line Ringing set. Not used for calls presented to the user as a member of the Operator group. This feature is also not used for BST phones.