Before a user can activate a contact closure, you must assign the user’s extension to the contact closure group for that contact closure.
•
If a contact closure is used to control a door lock and a doorphone is also installed at that door, you may also want to assign the extensions in the contact closure group to also be the doorphone alert extensions for that doorphone.
•
Users in the group can active the contact closure using a Contact Closure button.
1408/1416/9404/9408/9504/9508 Phone
1.
At either of the first two extensions on the system, with the phone idle, press Admin.
2.
Use the up or down arrow buttons to scroll the display to System Administration. When shown, press Select.
3.
Use the up or down arrow buttons to scroll the display to Auxiliary Equipment. When shown, press Select.
Use the up or down arrow buttons to scroll the display to Contact Close Grp. When shown, press Select.
5.
At the Group: prompt, enter 1 or 2 for the contact closure group you want to adjust.
6.
At the Extension: prompt enter the extension number whose group membership you want to change. The extension's current group membership is shown.
7.
Press 1 (Assigned) or 2 (Not assigned) to change the extension's membership. The default is 2 (Not assigned).
•
Alternatively use the left or right arrow icons to toggle through the settings or Default to return to the default setting.
8.
Use the up or down arrow buttons to select another extension to adjust if required.
•
Exit programming by pressing PHONE/EXIT. Alternatively use the Back button to move to another menu.
M7324/M7324N/M7310/M7310N/T7316/T7316E Phone
1.
At either of the first two extensions on the system, with the phone idle, press Feature **config (ie. Feature **266344).
•
If the system has a system password set, it is requested. Enter the password.
2.
The phone displays System Admin.
3.
Dial #612. The phone displays Contact Close Grp.
4.
Enter the number for the contact closure 1 or 2.
5.
At the Extension: prompt, enter the extension that you want to assign to the contact closure group.
6.
Press 1 (Assigned) or 2 (Not assigned) to change the extension's membership. The default is 2 (Not assigned).
•
To exit phone based administration at any time, press the Release button. To select a different process use the Next Procedure or Previous Procedure buttons or dial another feature code.
ETR 18D/ETR 34D Phone
1.
At either or the first two extensions on the system, with the phone idle, press Feature 0 0 followed by two presses of the first intercom or call appearance button.
2.
System Administration: is shown on the display.
3.
Dial #612. The phone displays Contact Close Grp.
4.
Enter the number for the contact closure 1 or 2.
5.
At the Extension: prompt, enter the extension that you want to assign to the contact closure group.
6.
Press 1 (Assigned) or 2 (Not assigned) to change the extension's membership. The default is 2 (Not assigned).
•
Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then placing it back in the cradle.
Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing
by Avaya before they become applicable to any particular order or contract. The company reserves the right to
make alterations or amendments at its own discretion. The publication of information in this document does not
imply freedom from patent or any other protective rights of Avaya or others.
All trademarks identified by (R) or TM are registered trademarks or trademarks respectively of Avaya LLC. All other
trademarks are the property of their respective owners.
up or down 
arrow buttons to scroll the display to System Administration. When shown, press Select.
left or right 
arrow icons to toggle through the settings or Default to return to the default setting. 
Feature **config (ie. Feature **266344).