IP Office Essential Edition - Basic Edition Phone Admin: System Maintenance
Copy Extension Settings
Set up your system by programming one extension for each type of telephone in the system. You can then use copy settings to program other telephones of the same type. For example, you can program one 1408 telephone and then copy its settings to any other extensions that have 1408 telephones.
•
This procedure is not listed when using the Next Procedure or Previous Procedure buttons to select a procedure.
1408/1416/9404/9408/9504/9508 Phone
1.
At either of the first two extensions on the system, with the phone idle, press Admin.
2.
Use the up or down arrow buttons to scroll the display to System Administration. When shown, press Select.
3.
Dial #399. The display will show Copy Settings:.
4.
At the Extension: prompt enter the number of the extension from which you want to copy the settings.
5.
At the next Extension: prompt enter the number of the extension to which you want to transfer the copy.
6.
If Proceed is not displayed or there is a problem, additional text messages may be displayed.
•
Exit programming by pressing PHONE/EXIT. Alternatively use the Back button to move to another menu.
M7324/M7324N/M7310/M7310N/T7316/T7316E Phone
1.
At either of the first two extensions on the system, with the phone idle, press Feature **config (ie. Feature **266344).
•
If the system has a system password set, it is requested. Enter the password.
2.
The phone displays System Admin.
3.
Dial #399. The phone displays Copy Settings.
4.
At the Extension prompt, enter the source extension to copy from.
5.
At the next Extension prompt, enter the target extension to copy to. Any extension except the source extension is valid.
•
To exit phone based administration at any time, press the Release button. To select a different process use the Next Procedure or Previous Procedure buttons or dial another feature code.
ETR 18D/ETR 34D Phone
1.
At either or the first two extensions on the system, with the phone idle, press Feature 0 0 followed by two presses of the first intercom or call appearance button.
2.
System Administration: is shown on the display.
3.
Dial #399. The phone displays Copy Settings.
4.
At the Extension prompt, enter the source extension to copy from.
5.
At the next Extension prompt, enter the target extension to copy to. Any extension except the source extension is valid.
•
Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then placing it back in the cradle.
Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing
by Avaya before they become applicable to any particular order or contract. The company reserves the right to
make alterations or amendments at its own discretion. The publication of information in this document does not
imply freedom from patent or any other protective rights of Avaya or others.
All trademarks identified by (R) or TM are registered trademarks or trademarks respectively of Avaya LLC. All other
trademarks are the property of their respective owners.
up or down 
arrow buttons to scroll the display to System Administration. When shown, press Select.
Feature **config (ie. Feature **266344).