| System Maintenance |
|
|
Remote Administration Password |
This password is used for system administration from a PC using the IP Office Manager application.
| • | This procedure is not listed when using the Next Procedure or Previous Procedure buttons to select a procedure. |
1408/1416/9404/9408/9504/9508 Phone
| 1. | At either of the first two extensions on the system, with the phone idle, press Admin. |
| 2. | Use the  up or down  arrow buttons to scroll the display to System Administration. When shown, press Select. |
| 3. | Dial #730. |
| 4. | If a system password has been set for the system, you will be prompted to enter that password before you can proceed. |
| 5. | The display will show Remote password:. |
| • | Enter a character by pressing the indicated button until that character is displayed. On 9400/9500 Series phones, accented versions of the characters are also shown. If you pause more than 1 second after press a button, the cursor will move onto the next space. |
1 |
1.,@ |
2 |
abc2 |
3 |
def3 |
||
4 |
ghi4 |
5 |
jkl5 |
6 |
mno6 |
||
7 |
pqrs7 |
8 |
tuv8 |
9 |
wxyz9 |
||
* |
* |
0 |
Space 0 |
# |
# |
| • | The first character and the first character after a space are automatically capitalized. |
| • | Use the  left and right  arrows keys to move the cursor. |
| • | Do not use punctuation characters such as #, ?, /, -, _ and , in the password. Note that the password is case sensitive and must be unique. |
| 4. | Use the dial pad to enter a password of up to 8 characters. When completed press Enter. To remove the characters entered so far press Clear. |
| • | Exit programming by pressing PHONE/EXIT. Alternatively use the Back button to move to another menu. |
M7324/M7324N/M7310/M7310N/T7316/T7316E Phone
| 1. | At either of the first two extensions on the system, with the phone idle, press  Feature **config (ie. Feature **266344). |
| • | If the system has a system password set, it is requested. Enter the password. |
| 2. | The phone displays System Admin. |
| 3. | Dial #730. |
| 4. | If a system password has been set, the prompt Enter Sys Password: is displayed. Enter the four digit system password. |
| 5. | The current remote administration password is displayed or dashes if no password has been set. Enter or change the password. |
| • | Enter a character by pressing the indicated button until that character is displayed. If you pause more than 1 second after press a button, the cursor will move onto the next space. |
1 |
1!”$%&’()+,-./ |
2 |
2abcABC |
3 |
3defDEF |
||
4 |
4ghiGHI |
5 |
5jklJKL |
6 |
6mnoMNO |
||
7 |
7pqrsPQRS |
8 |
8tuvTUV |
9 |
9wxyzWXYZ |
||
* |
*:;<=>?@[\]^_` |
0 |
0 Space |
# |
# |
| • | Do not use punctuation characters such as #, ?, /, -, _ and , in the password. Note that the password is case sensitive and must be unique. |
| 6. | To save the password, press Enter. The bottom line of the display shows the password as it has been entered. |
| • | To exit phone based administration at any time, press the Release button. To select a different process use the Next Procedure or Previous Procedure buttons or dial another feature code. |
ETR 18D/ETR 34D Phone
| 1. | At either or the first two extensions on the system, with the phone idle, press Feature 0 0 followed by two presses of the first intercom or call appearance button. |
| 2. | System Administration: is shown on the display. |
| 3. | Dial #730. |
| 4. | If a system password has been set, the prompt Enter Sys Password: is displayed. Enter the four digit system password. |
| 5. | The current remote administration password is displayed or dashes if no password has been set. Enter or change the password. |
| • | Enter a character by pressing the indicated button until that character is displayed. If you pause more than 1 second after press a button, the cursor will move onto the next space. |
1 |
1!”$%&’()+,-./ |
2 |
2abcABC |
3 |
3defDEF |
||
4 |
4ghiGHI |
5 |
5jklJKL |
6 |
6mnoMNO |
||
7 |
7pqrsPQRS |
8 |
8tuvTUV |
9 |
9wxyzWXYZ |
||
* |
*:;<=>?@[\]^_` |
0 |
0 Space |
# |
# |
| • | Do not use punctuation characters such as #, ?, /, -, _ and , in the password. Note that the password is case sensitive and must be unique. |
| 2. | To save the password, press Enter. The bottom line of the display shows the password as it has been entered. |
| • | Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then placing it back in the cradle. |
© 2011 Avaya LLC
- Issue 3.b.-
11:30, 22 March 2011
(remoteadministrationpassword.htm)
Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing
by Avaya before they become applicable to any particular order or contract. The company reserves the right to
make alterations or amendments at its own discretion. The publication of information in this document does not
imply freedom from patent or any other protective rights of Avaya or others.
All trademarks identified by (R) or TM are registered trademarks or trademarks respectively of Avaya LLC. All other
trademarks are the property of their respective owners.
Last Modified: 14/02/2011