Memory Card Startup/Shutdown

Before removing either of the SD cards from the system control unit, the card should be shut down. This ensures that file writes to the card and other operations are completed before the card is removed.

Note that the System SD card should only be removed for maintenance purposes. While the System SD card is shut down, no voicemail is available and licensed features will only run for up to 2 hours.

The System SD and Optional SD LEDs on the rear of the system are extinguished when no card is present or when the card has been shutdown and can be removed.

•	This procedure is not listed when using the Next Procedure or Previous Procedure buttons to select a procedure.

1.	At either of the first two extensions on the system, with the phone idle, press Admin.

2.	Use the up or down arrow buttons to scroll the display to System Administration. When shown, press Select.

4.	Enter 1 for the System SD card or 2 for the Optional SD card.

•	If the selected card is current running, the option Immediate Shutdown is displayed. To start the process press the Enter button, otherwise press #. The status will change to Shutting Down and then Shut Down. Check that the LED for that card slot is extinguished before removing the card.

•	If the selected card has been shut down, the option Start Up is displayed. To start the process press the Enter button, otherwise press #. The status will change to Starting Up and then Started Up.

•	If the selected card is not present, the message No Card is displayed.

•	If the selected card is currently performing another process which should not be interrupted System Busy is displayed.

•	Exit programming by pressing PHONE/EXIT. Alternatively use the Back button to move to another menu.

1.	At either of the first two extensions on the system, with the phone idle, press Feature config (ie. Feature 266344).

•	If the system has a system password set, it is requested. Enter the password.

4.	Enter 1 for the System SD card or 2 for the Optional SD card.

•	If the selected card is current running, the option Immediate Shutdown is displayed. To start the process press the Enter button, otherwise press #. The status will change to Shutting Down and then Shut Down. Check that the LED for that card slot is extinguished before removing the card.

•	If the selected card has been shut down, the option Start Up is displayed. To start the process press the Enter button, otherwise press #. The status will change to Starting Up and then Started Up.

•	If the selected card is not present, the message No Card is displayed.

•	If the selected card is currently performing another process which should not be interrupted System Busy is displayed.

•	To exit phone based administration at any time, press the Release button. To select a different process use the Next Procedure or Previous Procedure buttons or dial another feature code.

1.	At either or the first two extensions on the system, with the phone idle, press Feature 0 0 followed by two presses of the first intercom or call appearance button.

4.	Enter 1 for the System SD card or 2 for the Optional SD card.

•	If the selected card is current running, the option Immediate Shutdown is displayed. To start the process press the Enter button, otherwise press #. The status will change to Shutting Down and then Shut Down. Check that the LED for that card slot is extinguished before removing the card.

•	If the selected card has been shut down, the option Start Up is displayed. To start the process press the Enter button, otherwise press #. The status will change to Starting Up and then Started Up.

•	If the selected card is not present, the message No Card is displayed.

•	If the selected card is currently performing another process which should not be interrupted System Busy is displayed.

© 2011 Avaya LLC
- Issue 3.b.-
11:30, 22 March 2011
(memory_card_shutdown.htm)

Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing by Avaya before they become applicable to any particular order or contract. The company reserves the right to make alterations or amendments at its own discretion. The publication of information in this document does not imply freedom from patent or any other protective rights of Avaya or others.

All trademarks identified by (R) or TM are registered trademarks or trademarks respectively of Avaya LLC. All other trademarks are the property of their respective owners.