IP Office Essential Edition - Basic Edition Phone Admin: Ring Settings
Personal Ring Pattern
Use this feature to assign a personalized ring pattern to an extension. Once a personalized ring pattern is assigned to the extension, all incoming calls to that extension ring with the assigned ringing pattern.
•
The system does not pass distinctive ringing patterns generated by a PBX or central office through to extensions (regardless of the setting for this feature).
1408/1416/9404/9408/9504/9508 Phone
1.
At either of the first two extensions on the system, with the phone idle, press Admin.
2.
Use the up or down arrow buttons to scroll the display to System Administration. When shown, press Select.
3.
Use the up or down arrow buttons to scroll the display to Extensions. When shown, press Select.
4.
Use the up or down arrow buttons to scroll the display to Ring Pattern. When shown, press Select.
5.
At the Extension: prompt enter the extension you want to edit.
6.
The current setting is displayed.
7.
Enter 1 to 8 (1 to 4 for a BST phone). The default setting is 1.
•
Alternatively use the left or right arrow icons to toggle through the settings or Default to return to the default setting.
8.
Use the up or down arrow buttons to select another extension to adjust if required.
•
Exit programming by pressing PHONE/EXIT. Alternatively use the Back button to move to another menu.
M7324/M7324N/M7310/M7310N/T7316/T7316E Phone
1.
At either of the first two extensions on the system, with the phone idle, press Feature **config (ie. Feature **266344).
•
If the system has a system password set, it is requested. Enter the password.
2.
The phone displays System Admin.
3.
Dial #323. The phone displays Ring Pattern.
4.
At the Extension: prompt, enter the number of the extension to be programmed.
5.
At the Pattern prompt, enter a ringing pattern number 1 to 8 (1 to 4 for a BST phone). The default setting is 1.
•
Alternatively use the Next Data or Previous Data buttons to change the setting or press Remove to return to the default setting.
6.
Press the Next Item or Previous Item button for the next or previous extension respectively.
•
To exit phone based administration at any time, press the Release button. To select a different process use the Next Procedure or Previous Procedure buttons or dial another feature code.
ETR 18D/ETR 34D Phone
1.
At either or the first two extensions on the system, with the phone idle, press Feature 0 0 followed by two presses of the first intercom or call appearance button.
2.
System Administration: is shown on the display.
3.
Dial #323. The phone displays Ring Pattern.
4.
At the Extension: prompt, enter the number of the extension to be programmed.
5.
At the Pattern prompt, enter a ringing pattern number 1 to 8 (1 to 4 for a BST phone). The default setting is 1.
•
Alternatively use the Next Data or Previous Data buttons to change the setting or press Remove to return to the default setting.
7.
Press the Next Item or Previous Item button for the next or previous extension respectively.
•
Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then placing it back in the cradle.
Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing
by Avaya before they become applicable to any particular order or contract. The company reserves the right to
make alterations or amendments at its own discretion. The publication of information in this document does not
imply freedom from patent or any other protective rights of Avaya or others.
All trademarks identified by (R) or TM are registered trademarks or trademarks respectively of Avaya LLC. All other
trademarks are the property of their respective owners.
up or down 
arrow buttons to scroll the display to System Administration. When shown, press Select.
left or right 
arrow icons to toggle through the settings or Default to return to the default setting. 
Feature **config (ie. Feature **266344).