System Maintenance

Restore the Configuration

You can restore a previous backup by copying a configuration file from a card in the Optional SD slot, to the System SD card and restart the system with the new configuration.

! WARNING
This process will restart the phone system and disconnect all currently connected calls.
This procedure is not listed when using the Next Procedure or Previous Procedure buttons to select a procedure.

 

1408/1416/9404/9408/9504/9508 Phone

1.At either of the first two extensions on the system, with the phone idle, press Admin.
2.Use the up arrow up or down down arrow arrow buttons to scroll the display to System Administration. When shown, press Select.
3.Dial #125. The display will show System Manual Backup:. Press Proceed to start the restore.
4.If Proceed is not displayed or there is a problem, additional text messages may be displayed.
Shutdown and Insert Card
No card was detected in the phone system's System SD card slot. For correct operation of the phone system the Avaya SD card should always be present at all times.
System Busy
Another backup, restore, upgrade or copy was already in progress at the time the manual process was requested.
Restore Failed: Try Again
This message indicates that there was some problem. For example the card in the phone system's System SD card slot was removed during the restoration or the card has become corrupted.
5.If the restore is successful, the system will be restarted.

 

M7324/M7324N/M7310/M7310N/T7316/T7316E Phone

1.At either of the first two extensions on the system, with the phone idle, press feature small Feature **config (ie. Feature **266344).
If the system has a system password set, it is requested. Enter the password.
2.The phone displays System Admin.
3.Dial #125. The display shows System Manual Restore.
4.Press Enter to start the restore.
Shutdown and Insert Card
No card was detected in the phone system's System SD card slot. For correct operation of the phone system the Avaya SD card should always be present at all times.
System Busy
Another backup, restore, upgrade or copy was already in progress at the time the manual process was requested.
Restore Failed: Try Again
This message indicates that there was some problem. For example the card in the phone system's System SD card slot was removed during the restoration or the card has become corrupted.

 

ETR 18D/ETR 34D Phone

1.At either or the first two extensions on the system, with the phone idle, press Feature 0 0 followed by two presses of the first intercom or call appearance button.
2.System Administration: is shown on the display.
3.Dial #125. The display shows System Manual Restore.
4.Press Enter to start the restore.
Shutdown and Insert Card
No card was detected in the phone system's System SD card slot. For correct operation of the phone system the Avaya SD card should always be present at all times.
System Busy
Another backup, restore, upgrade or copy was already in progress at the time the manual process was requested.
Restore Failed: Try Again
This message indicates that there was some problem. For example the card in the phone system's System SD card slot was removed during the restoration or the card has become corrupted.
4.If the restore is successful, the system will be restarted.

 

 

© 2011 AVAYA
- Issue 3.b.-
11:30, 22 March 2011
(restore.htm)

Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing by Avaya before they become applicable to any particular order or contract. The company reserves the right to make alterations or amendments at its own discretion. The publication of information in this document does not imply freedom from patent or any other protective rights of Avaya or others.

All trademarks identified by (R) or TM are registered trademarks or trademarks respectively of Avaya Inc. All other trademarks are the property of their respective owners.

Last Modified: 14/02/2011