This card is used to add 4 additional expansion ports to the control unit.

Systems support up to 8 external expansion modules as standard. If fitted with an IP500 4-Port Expansion Base Card, up to 12 external expansion modules are supported.

4Port

Supports
Provides 4 additional expansion ports for connection of external expansion modules.

Supported Expansion Modules:
The 4-Portal Expansion card supports the following external expansion modules:

IP500 Analogue Trunk Module.

IP500 BRI So Module.

IP500 Digital Station Module.

IP500 Digital Station Module A.

IP500 Digital Station Module B.

IP500 Phone Module.

Maximum per Control Unit: 1 - Right-hand slot 4 only.

Trunk Card Support:

IP Office Modes: Not supported in IP Office Basic Edition modes.

Each external expansion module is supplied with a blue 1 meter (3'3'') expansion interconnect cable. This cable must be used when connecting to expansion ports on the rear of a control unit.

When connecting to expansion ports on an IP500 4-Port Expansion card, a supplied yellow 2 meter (6'6") expansion interconnect cable can be used in place of the supplied blue cable. 4 Yellow cables are supplied with the IP500 4-Port Expansion card.

port leds 02

LEDs 1 to 8 are used for the expansion ports on the rear of the control unit. LEDs 9 to 12 are used for the card's own expansion ports.

Green

On

Expansion module present.

Red

Flashing

Initializing.

Red

On

Error.

Orange

Regular Flash

Base card okay.

Name

Description

SAP Code

IPO IP500 EXP CARD 4PT

Includes 4 yellow 2 meter interconnect cables.

700472889

IPO EXP CABLE RJ45/RJ45 2M YELLOW

Only for use with the 4-Port Expansion card.

700472871