Please enable JavaScript to view this site.

IP500 V2/V2A IP Office Subscription

> System Components

IP500 V2/V2A Control Unit

Scroll Prev Up Next More

The IP500 V2/V2A control unit is a stackable unit with an optional 19" rack mounting kit and optional wall mounting kit for smaller configurations. The IP500 V2/V2A control unit has 4 slots for the insertion of base cards.

The slots are numbered 1 to 4 from left to right. They can be used in any order. However, if the capacity for a particular type of card is exceeded, the card in the rightmost slot is disabled. The unit must not be used with uncovered slots.

IP500V2_Control_Unit

Feature

Capacity

Maximum Extensions

Up to 384 extensions (depending on the IP Office mode, see Overall Capacity).

Conference Parties

128 as standard but maximum 64 in any individual conference. Silence suppression is applied to conferences with more than 10 parties.

Trunks Cards

4 x IP500 trunk daughter cards, see IP500 Base Cards. Some base cards can also be fitted with trunk cards, see IP500 Trunk Daughter Cards.

Voice Compression Channels

Up to 148 channels using IP500 VCM and IP500 Combination cards. Up to 20 using IP500 Combination cards.

Voicemail Channels

Maximum 40 usable for Voicemail Pro/TAPI WAV connection sessions. 6 for Embedded Voicemail.

Locales

Supported in all IP Office locales.

Minimum Software Level

IP500 V2: R6.0 and higher.

IP500 V2A: R11.0.4.8 and higher.

Bin file = ip500v2.bin.

Power Supply

Internal power supply unit.

Mounting

Free-standing, rack mounted (requires IPO IP500 RACK MNTG KIT) or wall mounted (requires IPO IP500 WALL MNTG KIT).

Dimensions

Width: 445mm/17.5". Depth: 365mm/14.4". Height: 73mm/2.9"/2U. Clearance: 90mm minimum all sides, 220m at front.

Memory

Maximum configuration file size: 2048KB.

 

 

Name

 

Description

Country

SAP Code

IP500 V2 Control Units

IPO IP500 V2 CNTRL Unit

IP Office 500 V2 Control Unit

700476005

IPO IP500 V2 CNTRL Unit TAA

" Trade Agreements Act compliant variant.

700501510

IP500 V2A Control Units

IPO IP500 V2A CNTRL UNIT

IP Office 500 V2A Control Unit

700514867

IPO IP500 V2A CNTRL UNIT TAA

" Trade Agreements Act compliant variant.

700514869

Avaya SD Memory Card

IPO IP500 V2/V2A SYS SD CARD AL

IP500 V2/V2A A-Law SD Card

700479702

IPO IP500 V2/V2A SYS SD CARD MUL

IP500 V2/V2A U-Law SD Card

700479710

IEC60320 C13 Earthed Power Cord

plug_ie60320_c13

IPO - PWR LEAD (EARTHED) EU CEE7/7

CEE7/7

Europe

700289762

IPO - PWR LEAD (EARTHED) UK

BS1363

United Kingdom

700289747

IPO - PWR LEAD (EARTHER) US

NEMA5-15P

America

700289770

Mounting Kits

IPO IP500 WALL MNTG KIT V3

IPO IP500 WALL MNTG KIT V3

700503160

Miscellaneous

IP500 Blanking Plate Kit

IP500 Blanking Plate Kit

700429194

 

ip500_front_annotated

ip500 v2 rearannotated

Ports

Description

AUDIO

3.5mm Stereo jack socket. Used for external music on hold source input.

AUX

If pressed during a restart of the control unit, the control unit skips booting from the /primary folder on the System SD card.

If pressed for more than 5 seconds when a system is running, the control unit shuts down for 10 minutes.

CPU

Indicates the status of the control unit.

Alternate red/green = Starting up.

Green on = Okay.

Red on = No software.

Flashing Red = Error/Shutdown.

EXPANSION

RJ45 socket. Used for direct connection to external expansion modules using the Expansion Interconnect cable supplied with the expansion module.

EXT O/P

3.5mm Stereo jack socket. Used for switching external relay systems such as door entry controls. The port contains two independent switches controlled by the IP Office.

INPUT

AC power input port.

LAN

RJ45 socket. The port is a full-duplex 10/100Mbps auto-sensing, MDI crossover port.

Optional SD

Used for the Optional SD card. The LED is used in the same way as for the System SD (see below).

RESET

This switch is used to restart the IP Office, optionally erasing the configuration and or the core software in the process. See Reset Button.

RS232

9-Way D-Type socket. Used for system maintenance. see RS232 Port Maintenance.

System SD

Used for the System SD card,. The LED is used as follows.

Off = Card shutdown.

Green on = Card present.

Green flashing = Card in use.

Orange steady = Reset imminent.

Red flashing = Card initializing or shutting down.

Red fast flashing = card full

Red steady = Card failure/wrong type.

WAN

RJ45 socket. This port is not supported on systems running in IP Office Subscription mode.

ground symbol

Used for connection of a functional or protective ground. Use of a ground for all systems is recommended and for some locales may be a regulatory requirement.

 

 

Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing by Avaya before they become applicable to any particular order or contract. The company reserves the right to make alterations or amendments at its own discretion. The publication of information in this document does not imply freedom from patent or any other protective rights of Avaya or others. All trademarks identified by ™, ® or © are registered trademarks or trademarks respectively are the property of their respective owners.

Use of this site indicates acceptance of its cookies and analytics, and acceptance of the Avaya privacy policy.

© 2022 AVAYA
Issue 38.h.-
Monday, August 15, 2022