IP500 V2A control units have a Reset button. Pressing the button while the control unit is starting up will pause the start up until the button is released. The effect of pressing the button during normal operation will depend on how long the button is pressed and is indicated by the CPU LED.
Press (seconds) |
CPU LED |
Action |
Summary |
|---|---|---|---|
0 to 5. |
Off |
None |
None. |
5 to 10. |
Orange |
Reboot When Free |
Reboot when free with new incoming/outgoing call barring. A reboot using the reset button is recorded in the Audit Trail. |
10 to 30. |
Flashing orange |
Erase Configuration |
Erase the configuration, alarm log and audit trail. Immediate reboot without waiting for active calls to end. See Erasing the configuration for full details. |
30 to 40. |
Red |
Erase All. |
Erase configuration, alarm log and core software. See Erasing the Operational Software for full details. |
Over 40. |
Flashing green |
None |
None. |