The IP400 Digital Station V2 (also known as DS V2) is used to add additional DS ports to an IP Office system. The DS V2 is available in 16 and 30 port variants, referred to as DS16 V2 and DS30 V2 respectively.

ds v2 3d large

The DS V2 supersedes the original IP400 Digital Station, now referred to as a DS V1. The module version is indicated by labels both the base and the rear of the module.

Feature

Details

Locales

Supported in all IP Office locales.

Minimum Software Level

IP Office core software level 2.1(31) minimum. Bin file = nadcpV2.bin.

Included

Power supply unit (see below) and Expansion Interconnect cable.

Power Supply

The module is supplied with a Earthed 3-Pin, 60W external power supply module. The PSU has an integral power cord for connection to the module's DC I/P socket. A locale specific IEC60320 C13 power cord for the external PSU is required but is not supplied with the module.

Mounting

The module is designed as a free-standing module that can be stacked on or under other IP Office modules. The module can be rack mounted in a 19" rack system using the optional IP400 Rack Mounting Kit.

Dimensions

Width: 445mm/17.5". Depth: 245mm/9.7". Height: 71mm/2.8"/2U.

Weight

Unboxed: 3.5Kg/7.8lbs. Boxed: 4.8Kg/10.8lbs. (Based on DS30 V2)

Module Front

ds_v2_front

Module Rear

ds_v2_rear

Ports

Description

DC I/P

DC power input port. Used for connection of the power lead from an Avaya earthed 60W external power supply unit supplied with the expansion module. A locale specific IEC60320 C13 power cord for the external PSU is required but is not supplied with the module.

DS

RJ45 socket. Digital Station port. Used for connection of IP Office supported DS phones. If connected to an out-of-building extension, the connection must be made via additional IROB barrier devices in addition to the buildings primary protection. The module must also be connected to a protective ground.

DTE

9-Way D-Type socket. For Avaya use only.

EXPANSION

RJ45 Socket. Used for direct connection to an Expansion port on an IP Office control unit using the Expansion Interconnect cable supplied with the module.

earth symbol

Protective Ground point. Use of a protective ground is required for all installations, see Grounding (Earthing). Where the module is connected to analog extensions in another building, an IP Office Phone Barrier Box V2 (101V) is required at both ends, see Lightning Protection/Out-of-Building Connections.

Part Codes and Related Equipment

All expansion modules are supplied with a base software level and should be upgraded to match the core software of the control unit in the IP Office system. Expansion modules include an external power supply unit (PSU) and an appropriate interconnect cable. They do not include a locale specific power cord for the external PSU or any phone extension cables.

Item

Variant

Country

SAP Code

IP400 Digital Station V2

16 Ports

All

700359839

30 Ports

All

700359847

IEC60320 C13 Power Cord

plug_ie60320_c13

CEE7/7

Europe

700289762

BS1363

United Kingdom

700289747

NEMA5-15P

America

700289770

IP400 Rack Mounting Kit

All

700210800