Please enable JavaScript to view this site.

IP500 V2/V2A IP Office Basic Edition

part j3

System Monitor is a tool that can show all activity on the IP Office system in great detail. As a consequence, interpretation of Monitor traces requires a high-level of data and telephony protocol knowledge. However, all IP Office installers and maintainers must understand how to run Monitor when necessary as Avaya may request copies of Monitor traces to resolve support issues.

For full details of using System Monitor, refer to the using "Using IP Office System Monitor" manual.


IP Office Administration PC
A Windows PC with the IP Office Administrator Application suite installed.

LAN Cable

1.To start System Monitor:

1.Select Start | Programs | IP Office | System Monitor.

2.Select File and then Select Unit.

3.Enter the IP Address and Password of the system that you want to monitor. The values depend on the protocol selected.










Use the same name and password as used for Administrator access for system configuration.


The System Password or, if set, the specific Monitor Password.

4.Click OK.



Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing by Avaya before they become applicable to any particular order or contract. The company reserves the right to make alterations or amendments at its own discretion. The publication of information in this document does not imply freedom from patent or any other protective rights of Avaya or others. All trademarks identified by ™, ® or © are registered trademarks or trademarks respectively are the property of their respective owners.

© 2022 AVAYA
Issue 38.g.-
Tuesday, July 19, 2022