The following feature codes can be dialed from most phones after pressing Feature. Most of these features can also be assigned to programmable buttons.
Feature |
DS Phones/ |
BST Phones |
Description |
|---|---|---|---|
01 |
85 |
This function allows the user to set the extension's do not disturb on or off. |
|
01 |
#85 |
||
03 |
71 |
This function allows the user to send a recall or hook flash signal. |
|
04 |
67 |
This function allows the user to save the number dialed during a call and to redial that number when idle. This can be used when the number dialed does not answer. |
|
05 |
5 |
This function allows the user to redial the last external number dialed. |
|
06 |
934 |
This function allows the user to drop a call from a conference. |
|
07 |
83 |
This function allows the user to turn privacy on or off. When on, other extensions are not able to bridge into the user's calls. |
|
11 |
4 |
This function allows the user to redirect all their calls to another number. Extensions with Remote Call Forwarding enabled can also forward calls externally by specifying a personal speed dial as the destination. |
|
11 |
#4 |
||
12 |
900 |
This function allows the user to enter an account code prior to making a call or during a call. |
|
14 |
986 |
This function allows the user to transfer their current call to an extension's mailbox. After pressing the button, the current call is put on hold and the user can then enter the target extension number to indicate the mailbox required. |
|
15 |
984 |
This function allows the user to switch use of voicemail coverage for their extension on or off. |
|
16 |
933 |
This function allows the user to swap the display of caller ID name and number information on their extension. |
|
17 |
811 |
This function allows the user to see the caller ID of a call on another line without interrupting the current call to which they are connected. |
|
20 |
932 |
This function allows the user to switch call coverage for their extension on or off. The button settings include the extension number of the extension providing coverage. When on, calls to the user that ring unanswered for the user's number of coverage rings then also start ringing at the call coverage extensions. |
|
21 |
936 |
This function allows the user to lock their extension from being used to make calls. After they press the button, they are prompted to enter a four digit code after which the extension is locked. If the extension is already locked, pressing the button prompts for reentry of the four digit code to unlock the extension. |
|
22 |
937 |
This function can only be used by the first two extensions in the system. This function allows the user to unlock any extension without needing to know the code that was used to lock that extension. When the button is pressed, the user is prompted to enter the number of the locked extension. |
|
23 |
812 |
This function allows the user to view the phone system's call log of all caller IDs of calls received by the system. To use the button the user must be one of the three extensions configured for call ID logging. |
|
26 |
935 |
This function allows the user to dial a number without first going off hook or pressing the SPEAKER button. Automatic line selection is used to select a line. |
|
28 |
931 |
This function allows the user to set or clear an absent message for display on their phone. When set, the absent message is also displayed on other extensions when they call the user. |
|
41 |
9*41 |
This function allows the user to operate the system's contact closure 1 connection. The user must be a member of the contact closure group. |
|
42 |
9*42 |
This function allows the user to operate the system's contact closure 2 connection. The user must be a member of the contact closure group. |
|
590 |
9*80 |
Displays the core software level that the system is running. |
|
591 |
9*81 |
Displays the IP address of the systems LAN port. |
|
592 |
9*82 |
Displays the feature key number of the System SD card. This is the number used for validation of licenses entered into the system configuration. |
|
600 to 699 |
0, 600 to 699 |
Dial the selected system speed dial number. |
|
80 to 99 |
*4, 80 to 99 |
Dial the selected personal speed dial number. |
|
700 to 719 |
0, 700 to 719 |
Set a DND exception number. |