Use this feature to assign a personalized ring pattern to an extension. Once a personalized ring pattern is assigned to the extension, all incoming calls to that extension ring with the assigned ringing pattern.

The system does not pass distinctive ringing patterns generated by a PBX or central office through to extensions (regardless of the setting for this feature).

 

1408/1416/9504/9508 Phone

1.At either of the first two extensions on the system, press Admin.

To do the above during a call, you may need to press the key phone PHONE button to display the Admin soft key option. If you access phone administration during a call, only the key speaker SPEAKER, key mute MUTE and key headset HEADSET buttons still affect the connected call.

2.Use the up arrow up or down down arrow arrow buttons to scroll the display to System Administration. When highlighted, press Select.

3.Use the up arrow up or down down arrow arrow buttons to scroll the display to Extensions. When highlighted, press Select.

4.Use the up arrow up or down down arrow arrow buttons to scroll the display to Ring Pattern. When highlighted, press Select.

5.At the Extension: prompt enter the extension you want to edit.

6.The current setting is displayed.

7.Enter 1 to 8 (1 to 4 for a BST phone). The default setting is 1.

Alternatively use the left arrow left or right right arrow arrow icons to toggle through the settings or Default to return to the default setting.

8.Use the up arrow up or down down arrow arrow buttons to select another extension to adjust if required.

Exit programming by pressing key phone PHONE. Alternatively use the Back button to move to another menu.

 

M7324/M7324N/M7310/M7310N/T7316/T7316E Phone

1.At either of the first two extensions on the system, press feature small Feature **config (ie. Feature **266344).

If the system has a system password set, it is requested. Enter the password.

2.The phone displays System Admin.

3.Dial #323. The phone displays Ring Pattern.

4.At the Extension: prompt, enter the number of the extension to be programmed.

5.At the Pattern prompt, enter a ringing pattern number 1 to 8 (1 to 4 for a BST phone). The default setting is 1.

Alternatively use the Next Data or Previous Data buttons to change the setting or press Remove to return to the default setting.

6.Press the Next Item or Previous Item button for the next or previous extension respectively.

To exit phone based administration at any time, press the Release button. To select a different process use the Next Procedure or Previous Procedure buttons or dial another feature code.

 

ETR 18D/ETR 34D Phone

1.At either or the first two extensions on the system, press Feature 0 0 followed by two presses of the first intercom or call appearance button.

2.System Administration: is shown on the display.

3.Dial #323. The phone displays Ring Pattern.

4.At the Extension: prompt, enter the number of the extension to be programmed.

5.At the Pattern prompt, enter a ringing pattern number 1 to 8 (1 to 4 for a BST phone). The default setting is 1.

Alternatively use the Next Data or Previous Data buttons to change the setting or press Remove to return to the default setting.

6.Press the Next Item or Previous Item button for the next or previous extension respectively.

Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then placing it back in the cradle.