You can create a list of account codes that are used to verify those entered by extension users.
•
Each list entry can include up to six digits.
•
You can enter a ? wildcard character into the account code to match any single digit. For example, your company’s Sales Department has a three digit account code—the first digit represents the department and second and third digits represent the individuals in the department. You enter 4?? as the list entry.
1408/1416/9404/9408/9504/9508 Phone
1.
At either of the first two extensions on the system, with the phone idle, press Admin.
2.
Use the up or down arrow buttons to scroll the display to System Administration. When shown, press Select.
3.
Use the up or down arrow buttons to scroll the display to Restrictions/Permissions. When shown, press Select.
Use the up or down arrow buttons to scroll the display to Forced Act Code List. When shown, press Select.
5.
At the Entry: prompt enter the list entry you want to change by entering 01 to 99.
6.
The current setting is displayed.
7.
Enter the new number and press Enter. To enter a wildcard digit press HOLD. Press Clear to remove the existing number.
8.
Use the up or down arrow buttons to scroll through the other numbers in the list.
•
Exit programming by pressing PHONE/EXIT. Alternatively use the Back button to move to another menu.
M7324/M7324N/M7310/M7310N/T7316/T7316E Phone
1.
At either of the first two extensions on the system, with the phone idle, press Feature **config (ie. Feature **266344).
•
If the system has a system password set, it is requested. Enter the password.
2.
The phone displays System Admin.
3.
Dial #409. The phone will display FrcdActCd Lst.
4.
Select a list entry 01 to 99.
5.
Enter up to six digits for the list entry. If the account code is five digits or less, you must press Enter to save the account code in memory. To enter a wildcard digit press HOLD.
6.
Do one of the following:
•
To enter other account codes, press Next Item to select a different list entry and repeat Steps 5 and 6.
•
To change the account code you just entered, press Remove and repeat Steps 5 and 6.
•
To delete the account code you just entered, press Remove.
•
To exit phone based administration at any time, press the Release button. To select a different process use the Next Procedure or Previous Procedure buttons or dial another feature code.
ETR 18D/ETR 34D Phone
1.
At either or the first two extensions on the system, with the phone idle, press Feature 0 0 followed by two presses of the first intercom or call appearance button.
2.
System Administration: is shown on the display.
3.
Dial #409. The phone will display Forced Act Code List.
4.
Select a list entry 01 to 99.
5.
Enter up to six digits for the list entry. If the account code is five digits or less, you must press Enter to save the account code in memory. To enter a wildcard digit press HOLD.
6.
Do one of the following:
•
To enter other account codes, press Next Item to select a different list entry and repeat Steps 5 and 6.
•
To change the account code you just entered, press Remove and repeat Steps 5 and 6.
•
To delete the account code you just entered, press Remove.
7.
Press the Next Item or Previous Item button for the next or previous number entry.
•
Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then placing it back in the cradle.
Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing
by Avaya before they become applicable to any particular order or contract. The company reserves the right to
make alterations or amendments at its own discretion. The publication of information in this document does not
imply freedom from patent or any other protective rights of Avaya or others.
All trademarks identified by (R) or TM are registered trademarks or trademarks respectively of Avaya LLC. All other
trademarks are the property of their respective owners.
up or down 
arrow buttons to scroll the display to System Administration. When shown, press Select.
Feature **config (ie. Feature **266344).