Use this feature to determine if users can include more than one outside party in a conference call.
•
This feature setting applies to all system users.
•
If outside conference is allowed, you can have up to 64 outside parties in a conference including multiple external callers (but only 2 analog lines). If outside conference is disallowed, you can have only one outside party of any type in a conference.
1408/1416/9404/9408/9504/9508 Phone
1.
At either of the first two extensions on the system, with the phone idle, press Admin.
2.
Use the up or down arrow buttons to scroll the display to System Administration. When shown, press Select.
3.
Use the up or down arrow buttons to scroll the display to Extensions. When shown, press Select.
4.
Use the up or down arrow buttons to scroll the display to Outside Conf Denial. When shown, press Select.
5.
The current setting is displayed.
6.
Press either 1 or 2. Alternatively use the left or right arrow icons to toggle through the settings or Default to return to the default setting.
•
1 = Allow conference calls with multiple outside parties (the default setting).
•
2 = Disallow conference calls with two outside parties.
•
Exit programming by pressing PHONE/EXIT. Alternatively use the Back button to move to another menu.
M7324/M7324N/M7310/M7310N/T7316/T7316E Phone
1.
At either of the first two extensions on the system, with the phone idle, press Feature **config (ie. Feature **266344).
•
If the system has a system password set, it is requested. Enter the password.
2.
The phone displays System Admin.
3.
Dial #109. The phone displays Outside Conf Denial.
4.
Press either 1 or 2.
•
1 = Allow conference calls with multiple outside parties (the default setting).
•
2 = Disallow conference calls with two outside parties.
•
Alternatively use the Next Data or Previous Data buttons to change the setting or press Remove to return to the default setting.
•
To exit phone based administration at any time, press the Release button. To select a different process use the Next Procedure or Previous Procedure buttons or dial another feature code.
ETR 18D/ETR 34D Phone
1.
At either or the first two extensions on the system, with the phone idle, press Feature 0 0 followed by two presses of the first intercom or call appearance button.
2.
System Administration: is shown on the display.
3.
Dial #109. The phone displays Outside Conf Denial.
4.
Press a digit to display the required value:
•
1 = Allow conference calls with multiple outside parties (the default setting).
•
2 = Disallow conference calls with two outside parties.
•
Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then placing it back in the cradle.
Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing
by Avaya before they become applicable to any particular order or contract. The company reserves the right to
make alterations or amendments at its own discretion. The publication of information in this document does not
imply freedom from patent or any other protective rights of Avaya or others.
All trademarks identified by (R) or TM are registered trademarks or trademarks respectively of Avaya LLC. All other
trademarks are the property of their respective owners.
up or down 
arrow buttons to scroll the display to System Administration. When shown, press Select.
left or right 
arrow icons to toggle through the settings or Default to return to the default setting. 
Feature **config (ie. Feature **266344).