Please enable JavaScript to view this site.

IP500 V2/V2A IP Office Essential Edition

> » No topics above this. «

Installation Overview

Scroll Prev Up Next More

This installation process is a simple outline. Many steps can be completed before the actual installation at the customer site.

Installation process summary

1.System SD Card Licensing

a.Obtain an IP Office System SD card.

b.Using the card's PLDS ID number, obtain a license file for the required release of IP Office software. The file needs to include an IP Office Essential Edition license plus licenses for any other features required.

2.Prepare for installation

a.Environmental Requirements
Check that the installation area meets the system environmental requirements.

b.Space Requirements
Check that the installation area meets the system space requirements.

c.Tools and Parts Required
Check that you have the tools and additional parts required.

d.Documentation
Ensure that you have obtained and read all the relevant documentation.

e.Unpacking
Check that all the required equipment has been delivered and that there is no damage.

4.Admin Software Installation
For system installation you need a PC with the IP Office administrator software installed. This must include a copy of IP Office Manager that matches the IP Office software level required.

a.Downloading the Software

b.Installing the Administrator Applications

3.Preparing the System SD card
Upgrade the System SD card to the required release of IP Office software.

4.Install the control unit cards
Attach any trunk daughter cards to their IP500 base cards and insert the base cards into the control unit.

5.Install the system

a.Wall Mounting
If wall mounting, attach the brackets and fit the unit to the wall.

b.Rack Mounting
If rack mounting, attach the brackets and fit the control unit into the rack.

c.Connect the External Expansion Modules
Connect the external expansions modules to the control unit.

d.Ground the system
Attach required ground cables to the control unit and external expansion modules.

e.Starting the System
Insert the System SD card and power up the system.

f.Connecting Phones
Connect the Avaya digital phones.

6.Initial Configuration
Once the physical system is started, it can be configured. This can be done using either IP Office Manager or IP Office Web Manager.

 

 

 

Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing by Avaya before they become applicable to any particular order or contract. The company reserves the right to make alterations or amendments at its own discretion. The publication of information in this document does not imply freedom from patent or any other protective rights of Avaya or others. All trademarks identified by ™, ® or © are registered trademarks or trademarks respectively are the property of their respective owners.

© 2022 AVAYA
Issue 38.f.-
Monday, April 4, 2022